For screen reader problems with this website, please call281-720-75442 8 1 7 2 0 7 5 4 4Standard carrier rates apply to texts.

Schedule a free consultation with our team today!

Parasound® ZoneMaster™ Universal 2 Channel 4 Speaker & Sub Amplifier

Model #: ZoneMaster 250
136698
Parasound
At a Glance
Parasound® ZoneMaster™ Universal 2 Channel 4 Speaker & Sub Amplifier with independent audio sensing trigger and separate level controls
Call for Best Price
$99,999.00Save $NaN

Get to know this product.

  • Universal amplifier for applications from 50 to 200 watts
  • 4 speaker connections (A and B outputs for both channels)
  • High current for stable operation at 2 Ohms
  • Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
  • Class AB input stage plus premium Class D power stage
  • One Independent audio sensing trigger
  • One Independent 12 volt trigger input
  • Looping 12 volt trigger output for one zone
  • Speaker level input for expanding systems w/out pre out jacks
  • One bus input can be routed to any zone
  • Looping output to connect additional amplifiers
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for both channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
  • Compact 1u, 1/2 width chassis size
  • Full Range Mono RCA Output
  • 80Hz low pass Mono RCA output (for sub)
  • Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)

Power Output: RMS, All Channels Driven (20 Hz - 20 kHz)

  • 50 watts x 2 @ 8O
  • 90 watts x 2 @ 4O or 2O
  • 160 watts x 1 @ 8O (Bridged)
  • 200 watts x 1 @ 4O (Bridged)

Frequency Response

  • 10 Hz - 60 kHz, +0/-3 dB

Total Harmonic Distortion

  • < 0.05% at typical listening levels
  • < 1.0% at full power

Interchannel Crosstalk

  • 70 dB at 20 kHz

Input Sensitivity

  • 700mv = Full output (50 Watts @ 8 O)
  • Total Gain = 29 dB (Level controls set to Maximum)

S/N Ratio

  • > 112 dB, input shorted, IHF A-weighted

DC Trigger Requirements

  • +9 Vdc to +12 Vdc, 2 mA

Audio Trigger Requirements

  • 2 mV Audio Signal

Audio Trigger Requirements

  • 2 mV Audio Signal

AC Power Requirement

  • 250 Watts Maximum
  • 15 Watts Typical
  • 7.5 Watts Idle
  • 0.5 Watts Standby
  • 110-130 VAC 60 Hz or 220-255 VAC 50 Hz
  • Note: AC mains voltage is set only by qualified electronics technician.

Dimension

  • Height without feet: 1.75”
Specifications

Connections

Analog Audio(RCA) Output:1

Specifications

Power On Consumption (watts):15
Power Off Consumption (watts):0.5
Signal to Noise Ratio:112 dB
Watts RMS per Channel (4-ohms):90
Watts RMS per Channel (8-ohms):50

Misc. Specs

Depth (in.)10
Height (in.)2
Width (in.)8.5
Channels2
Analog Audio(RCA) Input1
Preamp Outputs2
Product Weight (lbs.)4
WarningProposition 65 Warning for California Residents